Relais 2 Switch 2-Channel – Pour démarreur, feu de position & feu de croisement

This electronic relay have 2 independent channels. Each output can drive 70 Watt. The small size allow an installation in the handlebar or in the headlight. You can switch different loads with a push button. Two different inputs allow to control each output with the switch button, no matter if the button is wired to ground or to + 12 Volt.

The Touch 2 Swictch module can also be use as a standard toggle switch relay. Just wire the thin brown input cable direct to ground and the thin blue cinput able direct to + 12 Volt.That´s it. Now the module toggle between output 1 and output 2 if you press the button what is wired to the thin violet cable.

• Inputs for non-locking push-button switches in separate mode and for locking switches if the channels are linked together.
• You can use very thin cables for the connection between the buttons and the module
• 2 independent channels, what can be linked together in order to increase the maximum load to 120 Watt.
• The small dimensions allow an implementation in the most handle bars.
• The module can also work as voltage inverter.
• Push-button switch (not latching) with connection to chassis or to + 12 Volt