Égaliseur de charge réglable de clignotants Vari Load

You know the szenario: you have installed the new beautful led flashers in your bike and now you have trouble with the flasher speed cause the new led lights have a much lower power consumption compare to the old bulbs, leading in faster flashes or any kind of other trouble with your ecu in your bike. However You can buy and try different load equalizer for your bike until you have spend much time and money and have found the right load equalizer for your bike.

The load is simple adustable by touching and holding the blue cable to + 12 Volt or ground. A touch and hold to + 12 Volt increases the load up to 10 Watt. Touching and holding the blue cable to ground result in a decrease of the load down to 0 Watt. A flashing led indicates the change of the load and the preset number. The led is permanent on if the minimum or maximum value is reach and switches off when you remove the blue cable and the adjusted value is stored in the Vari Load as preset. The time between the lowest load value and the maximum load value is about 20 seconds.

Compatibilité:

Champ d’application: For all Models with electronic Turn Signal Control.